AI MDVR Installation and debug manual
31
6.1
BSD calibration
6.1.1
Correct the camera position
●
After acquiring the image, tap the screen to enter the calibration
page.
●
After entering the calibration interface, start the first step of
calibration, and click Next after completing the voice prompts.
●
BSD calibration is divided into three area levels, the red
innermost layer (first level), the yellow middle layer (second
level), and the green outermost layer (third level). The three
areas can not be calibrated beyond the white area. At the
intersection of the upper right corners of the level 1, level 2,
and level 3 boxes, drag the adjustable alarm area, such as 1 meter
from the car for level 1, 2 meters for level 2, and 3 meters for
level 3.
●
After the calibration area is divided, click [Finish]
●
[Right front] and [Right rear] calibration methods are the same