AI MDVR Installation and debug manual
27
►
Vehicle width, in mm (Note: Take the distance from the outside of the
left front wheel of the vehicle to the outside of the right front wheel
of the vehicle);
►
The distance from the camera to the front bumper, in mm (Note: the
horizontal distance from the camera installation position to the front
bumper);
►
The height of the camera from the ground, in mm (Note: the vertical
height from the camera installation position to the ground);
►
The distance between the camera and the center of the vehicle, in mm
(0mm). When installed to the center position, fill in 0. When the camera
is located to the left of the center position, select "Center Left", and
if the camera is located to the right of the center position, select
"Center Left" and then set the corresponding deviation value, see 5.1.1.;
►
Camera resolution, the default is 1080P;
►
Click [Previous Step] to return to the previous calibration interface,
that is, step2 calibrate the position of the vanishing point of heaven
and earth;
►
Click the [Finish] button: prompt the user [calibration in progress]
(voice+toast), after the calibration is successful, prompt the user
[calibration successful] (voice+toast), enter the ADAS homepage and start
working;
►
The vehicle information is empty the first time it is entered. After
the user enters once and clicks, the next time it is entered, it is filled
by the user by default, without the need for the user to enter it again,
and the user is allowed to modify it. );