AI MDVR Installation and debug manual
25
●
Click 【Next step】 to enter the next step, enter vehicle parameter
information;
●
You can click the 【Help】 button to pop up a prompt box 【Move
the yellow cross, so that the center point of the cross is at the
vanishing point of heaven and earth; you can use the four direction
buttons to fine-tune.】Follow the prompts to complete the
calibration. After completion, click the 【Finish】 button to
return to the calibration interface.
①
Install the camera, try to ensure that the sky and the earth in the
picture each account for 50%. It is recommended that the camera be
installed in the center of the vehicle.
②
Measure the vertical height from the camera to the ground (in mm).
③
Move the cross point to the vanishing point on the mobile phone
calibration APP. The method of confirming the vanishing point is
as follows:
1>
Measure 4 to 5 meters directly in front of the camera lens.
2>
The point where the vertical direction of the position in the
figure is equal to the height of the camera lens is the vanishing
point. As shown below:
④
Measure the horizontal width of the car and fill it (unit: mm).
