iCanView230/230W User’s Guide
these values to others and memorize
these values.
User Admin
& Time
Setup
Current Time
Input correct time in this field.
Default value :
2001/1/1
6.
Connect the input and output signals to iCanView230/230W.
Connectors
Function
Signal description
Number
LINE-
In/MIC
Audio in
Connect microphone or output from
audio devices.
1
Line Out
Audio out for
speaker
Audio from remote site is available
from this connector in bi-directional
audio mode. Connect speaker with
amplifier.
1
Alarm In
Connecting
Alarm Sensor
IR sensor, Motion Sensor, Smoke
Detector…
1
Alarm Out
Connecting
Alarm
annunciating
device
Siren, Flashing Light, …
1
RS485
PT device control
Remote P/T/Z device connection
having RS485 interface.
1
100Base-T
Network
connection
Connect iCanView230/230W to the
network, LAN, ADSL or Cable modem.
1
7.
Remote video connection to iCanView230/230W
Run
i-NVR
on your PC. Before connecting to iCanView230/230W it is needed to configure
the connection information on the i-NVR. More detailed information of using “
i-NVR
” can be
found in [
i-NVR User’s Guide
].
Rev.1.0 (Aug. 2006)
14 of 54
