14
5 Operation
Load
After selecting program, the materials to be sterilized can now be placed on the
tray and placed inside the chamber by the tray handle.
After the instruments are loaded, you may close the door.
Select the program
After you turns the sterilizer On, the main menu
will appear, select “Programs”.
Tap the program to select, in the screen will
appear the information of selected program as
the pressure, temperature, time (this may vary
depending on the environmental conditions and
the load), vacuum times, Sterilization time
(holding time) and drying time.
Start the sterilization program
After closing the door, tap “ ” to start the cycle.
The stage, conditions and the status of the cycle will
appear on the display. The sterilizers will perform the
program automatically. (see appendix 2).
