iCable System ICS-G302, Operator'S Manual, Page: 5 / 63

Page 5
UPnP functions
This S-MTA supports UPnP CP and IGD functions, and the default mode of UPnP
CP and UPnP IGD are disable.
In case that you are using a broadband router which supports UPnP IGD function
between your networking device such as a cable modem or an xDSL modem and
this S-MTA, you can enable UPnP CP function if you want to.
Please enable UPnP IGD function in case this S-MTA is connected directly to the
networking device such as a cable modem or a xDSL mode, and your PC is
connected to this S-MTA.
SIP port number and RTP port number
This S-MTA provides to change or modify the local SIP port, the default port
number is 5060, and the local starting RTP port, the default port number 5090.
In case that your PC is connected to this S-MTA, and you are using a SIP client
program such as a USB phone, the SIP port number is conflicted between this S-
MTA and your PC client program. If you want to use both VoIP services, please
change the local SIP port number of this S-MTA.
Further this S-MTA’s RTP port number and your PC’s SIP client program use the
same RTP port number, please change the local starting RTP port number of this
S-MTA.
Web Access
This S-MTA provides embedded web pages and you can access to this S-MTA’s
web pages by entering the default address
http://192.168.100.1 .
URL of this S-MTA : http://192.168.100.1
ID and password : root/wakeup
Provisioning
This S-MTA performs HTTPS, HTTP or TFTP provisioning which automatically
downloads configuration file information from the provisioning server every time
S-MTA boots up. Parameters in configuration file are consist of the proxy
sever, LAN, Upgrade firmware, VoIP Digitmap, VoIP port, CODEC information
and so on. HTTP based provisioning type is default. The S-MTA automatically