TECHNICAL DATA
Model: CM6622. Voltage: 220-240 V ~ 50 Hz.
Power: 1000 W.
28
GENERAL DESCRIPTION
➊
Water tank cover
➋
Top lid
➌
Detachable water tank
➍
On/Off indicator
➎
On/Off switch
➏
Filter basket
➐
Anti-drip valve
➑
Glass jug
➒
Warm plate
OPERATION:
1. Lift out the water tank, open the water tank
cover and fill with fresh cold water to required
level. Do not fill above the Max level.
Alternatively open the water tank cover and fill
the tank whilst in position on the coffee maker.
2. Refit the water tank, make sure that it is
correctly fit and press it down slightly, if
necessary, to ensure the watertank is fit
into position.
3. Turn the filter basket clockwise to open, put
the 1×4 paper filter into the filter basket, then
put adequate quantity of coffee powders into
the paper filter.
Note: Make sure the filter holder has been
assembled correctly to the filter basket
before this operation; refer cleaning part of
the disassembling and reassembling the
filter basket.
4. Turn the filter basket anti-clockwise until
click into position.
5. Place the jug on the warm plate.
6. Switch on the coffee maker by turn the
power switch to On position, the power
indicator will light up and now the appliance
starts to work.
7. The coffee maker will brew until the water
tank is emptied, then automatically enter into
keep-warm mode. The warm plate will keep
the brewed coffee warm until the appliance
switches automatically into off mode within
about 40 minutes.
8. Turn off the coffee maker when it is not in use.
Unplug from the socket.
Manual_Kaffebryggare_rostfri_CM6622.indd 28
2014-11-13 16:13