IC Electrical Load Manager 3050349
User Manual
Page 5 of 21
Rev 1
1. Features
The Innovative Controls Inc. Electrical Load Manager is used to monitor a vehicle’s battery system and
control electrical circuits to meet requirements detailed in NFPA-1901. All adjustments are made from the
front panel user interface that also serves as a real-time status display. Features include:
•
Main Battery Monitoring meets NFPA-1901
•
Auxiliary Battery Monitoring
•
Battery Measurements Accurate to +/- 0.5%
•
Electrical Load Shedding
•
Electrical Load Sequencing
•
Twelve Fully Programmable Load Outputs
•
Four Alarm Outputs
•
Low Main Battery Voltage Alarm
•
Low Auxiliary Battery Alarm
•
Fast Idle Output Function
•
Variable User Trip Output
•
Master Warning, Load Manager Enable, and Park Brake Inputs
•
Load Output Polarities Selectable
•
Control Input Polarities Selectable
•
Load Output Priority, Scene or Response Mode, Ignition or Warning Switch Logic all Selectable
•
Easy to Read 0.56” High Digital Display
•
Manual Override Switch for Troubleshooting
•
-40C to +105C (-40F to +220F) AEC-Q100 Level 2 Operating Temperature
•
All Outputs Protected from Over-Current, Reverse Polarity, Over-Temperature, and Transients
•
All Outputs Rated for 1A Continuous Duty
•
No Configuration Jumpers – All Parameters are Adjustable from the Front Panel
•
Lockable Front Panel User Interface
•
Default Configuration is Restorable from the Front Panel
•
Remote Cab Display
•
J1939 CAN Bus, RS-485, and USB Communication Options
•
12VDC or 24VDC Operation
