1
1
Installation and Connections
Note: All the installation and operations here should conform to your local electric safety
rules.
1.1
Check Unpacked NVR
When you receive the NVR from the forwarding agent, please check whether there is any
visible damage. The protective materials used for the package of the NVR can protect most
accidental clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list. Finally you can remove the protective film of
the NVR.
1.2
Front Panel
The front panel is shown as below. See Figure 1-1.
Figure 1-1
Please refer to the following sheet for front panel button information.
SN
Name
Function
1
Power button
Press it once to turn on the device.
Press it for a long time to turn off the device. (
Usually we do not
recommend
).
2 System
HDD
Indication light
The blue light flashes when system is reading or writing the system
HDD.
In the system HDD, there are device important configuration file,
factory default configuration file, and device initial boot up data.
3 Alarm
indication
light
The alarm indication light becomes on once an alarm occurred. The
alarm includes hardware alarm, network abnormal events, or system
receives the alarm signal and etc.
4 Network
indication light
The network indication light is blue and it flashes when you connect
the device to the network.
5 USB
port
/
6
Front panel lock
/
After you remove the front panel, you can see there are 16 HDDs. From the left to the right and
