18
4
WEB OPERATION
4.1
General Introduction
The device web provides channel monitor menu tree, search, alarm setup, system setup, PTZ
control and monitor window.
4.1.1 Preparation
Before log in, please make sure:
z
PC and NVR connection is OK.
z
You have set PC IP address, NVR IP address, subnet mask and gateway. (Please set the
IP address of the same section for the PC and NVR. Please input corresponding gateway
and subnet mask if there are routers.)
z
Use order ping ***.***.***.***(NVR IP address) to check connection is OK or not.
4.2
Login
Open IE and input NVR address in the address column. For example, if your NVR IP is
10.10.3.16, then please input http:// 10.10.3.16 in IE address column. See Figure 4-1.
Figure 4-1
System pops up warning information to ask you whether install webrec.cab control or not.
Please click yes button.
If you can’t download the ActiveX file, please modify your settings as follows. See Figure 4-2.
Input your IP
address here.
