IC Realtime Max 4, User Manual, Page: 65 / 131

©2009 IC Realtime, Inc. 65
Figure 5-21
5.3.6 Alarm
Please refer to Chapter 4.6 Alarm Setup and Activation.
5.3.7 Detect
Please refer to Chapter 4.5 Detect.
5.3.8 Pan/Tilt/Zoom
The pan/tilt/zoom setup includes the following items. Please select channel first.
See Figure 5-22.
Protocol: select corresponding PTZ protocol such as PELCOD.
Address: input corresponding PTZ address.
Baud rate: select baud rate.
Data bit: select data bit.
Stop bit: select stop bit.
Parity: there are three options: none/odd/even.
After completing setup, click save. The system will return to the previous menu.
For a detailed setup, please refer to Chapter 4.9 preset/patrol/pattern/scan.
Figure 5-22
5.3.9 Display
The Display setup menu is shown below. See Figure 5-23.
Transparency: Here is for you to adjust the transparency. The value ranges from
128 to 255.
Channel name: Here is for you to modify channel names. Please note all of your
modifications here only apply to the DVR local end. You need to open the web or
client end to refresh channel name.
Time display: You can select to display time or not when the system is in
playback.
Channel display: You can select to channel name or not when the system is in
playback.