IC Realtime Max 4, User Manual

Page: 104 / 131

©2009 IC Realtime, Inc. 104
Pan/Tilt/Zoom
Pan/Tilt/Zoom interface is shown as in Figure 7-43.
Note: Ensure you have assigned your dome and address at the camera, and all
physical connections are correct.
Channel: Select the channel that has your PTZ video.
Protocol: Select the corresponding dome protocol.(such as Pelco)
Address: Set corresponding dome address. Default value is 8. Note: your setup
here needs to correspond with your dome address; otherwise you can not control
the speed dome.
Baud rate: Select the dome baud rate. Default setup is 9600.
Data bit: Default setup is 8.
Stop bit: Default setup is 1.
Parity: Default setup is none.
Figure 7-43
Tool
Here you can export or import configuration information. See Figure 7-44.
Save configuration data: Click export config, to save the current setup as a .CFG file.
See Figure 7-45.
Load configuration data: Click import config, to load a .CFG setup file.