52
Figure 5- 27
Please refer to the following sheet for detailed information.
Parameter
Function
SNMP Version
Check SNMP v1, device only process v1 info.
Check SNMP v2, device only process v2 info.
Check SNMP v3, can set username, password and
encryption method. Server calibrate corresponding
username, password and encryption method too access
device and v1/v2 are unavailable.
SNMP port
The listening port of the proxy program of the device. It is a
UDP port not a TCP port. The value ranges from 1 to 65535.
The default value is 161
Community
It is a string, as command between management and proxy, ,
defining a proxy, and a manager’s authentication.
Read community
Read-only access to all SNMP targets, default is public.
Note: Only number, letter, _, and
– supported.
Write community
Read/write access to all SNMP targets, default is private.
Note: Only number, letter, _, and
– supported.
Trap address
The destination address of the Trap information from the
proxy program of the device.
Trap
SNMP trap is a proxy message sent to admin as important
event notice or status change.
Trap Address
Address where to send Trap message.
Trap Port
Port which send Trap message, default is 162, range
1~65535.
Summary of Contents for ICIPD4002IR28
Page 1: ...i Network Camera Web3 0 Operation Manual Version 1 1 0F ...
Page 9: ...5 Figure 1 7 ...
Page 42: ...38 Figure 5 10 Figure 5 11 ...
Page 64: ...60 Figure 5 37 Figure 5 38 ...
