15
Figure 3- 6 General installation 4
e) Please refer to Chapter 3.2.2 for the lens zoom and focus operation of the manual focus series
product.
f) For the IR series product, please skip current step and complete the angle setup directly. For the non-
IR series product, please put back the black plastic decoration enclosure to complete the angle setup.
Important
Please note Figure 3- 6 is based on non-IR series. For IR series, the lock screw position and the
lens angle adjustment are the same.
Step 5
Line up the dome camera protection enclosure and follow step 2 reversely to put it back.
Note
Usually we recommend, after the installation, please take the three white static protection gaskets
from the accessories bag and insert them to the screw holes of the protection enclosure. It is to
enhance device reliability.
If you want to install Micro SD card, please refer to chapter 3.3.
3.2.2 Manual Zoom Lens Focus Operation
The manual zoom lens focus interface is shown as in Figure 3- 7.
Lock screw B/C
Adjust lens tilt rotation
angle.
Lock screw D
Adjust lend pan rotation
angle.
Lock Screw A
Adjust lend pan rotation
angle.
