background image

1A. OVERVIEW

This series network camera integrates the traditional camera and 

network  video  technology.  It  adopts  video  data  collection  and 

transmission  together.  It  can  connect  to  the  network  directly 

without  any  auxiliary  device.  Additionally,  the  390  Panoramic 

Fisheye  series support dewarp modes on web GUI , Smart ICRSS 

or ICRSS Pro.

This  series  network  camera  uses  standard  H.264  video 

compression  technology  as  well  as  H.265  which  maximizes  the 

video quality and storage. 

The  IPEL-F12  models  supports  IR  night  vision  function.  In  the 

night environments, the device can use the IR light to highlight the 

object  which  is  suitable  for  the  surveillance  function  in  the  low 

illumination environments. The waterproof design conforms to the 

IP67 level. It has the sound waterproof function suitable for use in 

the outdoor environments. 

It can be used standalone or with a network video recorder. If used 

standalone,  it  is  able  to  utilize  IC  Realtime’s  software  suite 

including Smart ICRSS, IC View and ICRSS Pro. This model also 

supports IC Realtime’s P2P connection which allows easy remote 

connection.

1B. Cable Interface

1.

AUDIO OUT:  Output audio signal to the speakers..

2.

AUDIO  IN:  Input  audio  signal,  receive  the  analog  audio  signal  from  the 

sound pick-up

3.

LAN: Ethernet port to connect with network cable. Supports PoE

4.

I/O: Alarm Input/ Output

5.

POWER: For 12v power connection..

          

                                                                                        

IPEL-F50F-W1 

     

              

IPEL-F12F-IRW1 

                                                                      

                                                            Figure 1-1

MARGIN

GUIDES

To see the guides to go:

View / Guides / Show 

Guides

2  

|  

www.icrealtime.com

Summary of Contents for HD 360












Reviews: