IC Realtime Full HD(HD-SDI) CCTV Box Camera, Instruction Manual

Page: 9 / 15

18 19
7. Functions and operation 7. Functions and operation
(1) IRIS MODE (6) BLC (Back Light Compensation)
(2) DC IRIS LEVEL : Adjusts the mechanical Iris lens in
00 ~ 50(Default22)
(4) FLICKERLESS : This is used only when there is a
difference in frequency between the
power system (50Hz) and
TV system (60Hz). In this case, flicker is
occurred on the monitor.
In most countries other than Japan, FLICKERLESS mode is
not necessary.
තG NOTE
- DC : Selects DC drive auto iris lens.
- ESC : Selects manual iris lens
- AE HOLD : Fixes the change of the brightness.
This mode is useful when lots of motions are
detected on the monitor.
(3) BRIGHTNESS : Adjusts the brightness in
00 ~ 30(Default 07)
(5) ATR-EX (WDR) : This mode functions like WDR.
3 modes of Off/Low/Mid/High can be
selected.
Wide Dynamic Range Performance
In general, it is very hard to see objects
inside the buildings, etc in case that
there comes strong light from the
outside.
By using ATR-EX(WDR) mode, the
difference in brightness between the bright area and the dark area
can be minimized and consequently those objects inside and
outside of the buildings or windows can be seen all together even
though there is strong light or backlight from the outside.
When the power system (50Hz) and the TV system(60Hz) are different,
- ‘Flickerless on’ mode is recommended for indoor use.
- ‘Flickerless off’ mode is recommended for outdoor use.
තG NOTE
- This mode is recommended for those environment with backlight or shade.
- When ATR-EX(WDR) is ON, DC IRIS LEVEL, BRIGHTNESS, BLC menu’s are all
inactivated.
7-7.AE (Auto Exposure)
Enables a user to directly select a desired area from a
picture, and to view the area more clearly even under
backlight environment.
- BLC : Used for backlight environment.
(Indoor objects can be seen.)
- FLC : Compensates the saturation of image when camera
faces toward the same direction as sunlight.
Adjust the LEVEL 00 ~ 50(Default 00)
Compensates for the shading of the lens.
තG
NOTE
This function will be provided soon in next version.
The higher the gain level is, the brighter the screen
becomes. But the higher gain level causes more noise.
- LOW : Allows automatic gain control from 0 to 20dB.
- MIDDLE : Allows automatic gain control from 0 to 30dB.
- HIGH : Allows automatic gain control from 0 to 42dB.
This is an electronically activated function to improve the
sensitivity for viewing low light condition in addition to the
original sensitivity from the sensor itself.
Shutter level is adjustable x2 times.
At night, DSS is set to x2 automatically.
තG
NOTE
This function will be provided soon in next version.
(7) LSC (Lens Shading Correction)
(8) AGC(Auto Gain Control)
(9) DSS(Digital Slow Shutter)
(10) AE RESET
(11) RETURN
- Resets all settings of AE menu into the initial factory default value.
- Returns to the MAIN MENU.