IC Realtime Full HD(HD-SDI) CCTV Box Camera, Instruction Manual

Page: 7 / 15

14 15
7. Functions and operation 7. Functions and operation
* MAIN-menu : Use UP/ DOWN selections. / SUB-menu : Use LEFT/ RIGHT selection
3. Change the status of the selected feature using the LEFT/RIGHT selections.
When the LEFT or RIGHT selection is done, available values and modes are
displayed in order.
Please keep the selection until you get to the mode you wish to operate.
4. When completed, move the cursor indicator to ‘EXIT’ position and press the
Button to finish the setting.
· If appears at the mode you wish to operate, it means that there is a sub-menu
which can be selected by OSD Switch
7-3. VIDEO OUT
(1) VIDEO OUTSIZE
(2) FRAME RATE
- Six modes of 60/59.94/50/30/29.97/25 can be
selected.
(3) CVBS OUT MODE
- CVBS output can be set to NTSC or PAL according
to local TV standard.
ත NOTE
ත
NOTE
In case of 1080i mode, only 3 types of Frame rate
are available and they are 60/50/59.94 respectively.
When you use 1080P 60 mode, please check your
DVR or related HD devices first whether they support this mode or not.
(In this mode, cable connection distance is less than half of 1080P 30 mode.)
ත
NOTE
True Day & Night cameras with CDS & ICR are to be set in this mode.
- AUTO: Automatically turns between Day and Night Mode according to AGC operation.
- VIDEO OUTSIZE can be set to 1080P, 1080i, 720P
according to Local Regulation.
7-4. AUTO MENU SET
7-5. DAY / NIGHT
(1) NORMAL
- Sets as initial factory default value.
(2) 50HZ INDOOR
(3) 60HZ INDOOR
(4) OUTDOOR
- For indoor use in 50HZ (PAL) environment.
- For indoor use in 60HZ (NTSC) environment.
(In this mode, i.e. 50HZ INDOOR MODE, FLICKERLESS
changes automatically into 50HZ mode from initial
OFF mode.)
(In this mode, i.e. 60HZ INDOOR MODE, FLICKERLESS
changes automatically into 60HZ mode from initial
OFF mode.)
(In this mode, i.e. OUTDOOR MODE, AWB changes
automatically into PUSH mode from initial ATW mode.)
- For outdoor use.
- When set as ON and press SET KEY, it turns into AUTOSET NORMAL MODE
automatically, which means initial factory reset.
You can display pictures in Color/IR MODE/AUTO.
(1) DAY/NIGHT MODE
1. Please position the cursor on ‘DAY/NIGHT’ on the
SETUP menu by using the UP and DOWN selections.
2. Please select the mode you wish to operate by
using the LEFT and RIGHT selections.
- COLOR : The picture is always displayed in color.
- IR : The mode is switched to ‘DAY’ in a normal
environment, but switches into ‘NIGHT’ mode
when ambient illumination is low.
(5) AUTOSET RESET