Installation 7
Figure 3-2
No.
Item
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Expansion bolt
③
Pedestal
④
Self-tapping screw
⑤
Locking screw
⑥
Dome
⑦
Wrench
⑧
Screw Cover
Table 3-2
Find the mounting template sticker from the accessory pack and stick it to the mounting
Step 1
surface
①
.
Drill screw holes (and the cable outlet hole if it needs to go through the mounting
Step 2
surface) on the mounting surface as indicated on the mounting template, then insert
expansion bolts
②
from the accessory pack in the screw holes.
Loosen the locking screws
⑤
on the dome
⑥
with the supplied wrench
⑦
and take the
Step 3
dome
⑥
off.
Adjust the location of the pedestal
③
according to cable outlet requirement (top out or
Step 4
side out), then pull the cable out through mounting surface or the side cable tray. Align
the screw holes on the pedestal
③
to those on the mounting surface.
The attaching method of model A and model B is different from which of model C.
Step 5
For model A and model B, put in and fasten the supplied self-tapping screws
④
to
attach the device to the mounting surface.
For model C, put the screw covers
⑧
in the screw holes on the pedestal
③
, then
put the supplied self-tapping screws
④
through the screw covers
⑧
and fasten
them to attach the device to the mounting surface.
Connect the camera to power source and the HDAVR device, and the live view screen
Step 6
will be displayed. Aim the lens to the ideal angle and adjust the focus until you get clear
image. See Figure 3-3 or Figure 3-4.
