Installation 6
3
Installation
Make sure the mounting surface is strong enough to hold at least three times of the
camera weight.
Keep the protection film on the dome before installation and adjustment finished to avoid
possible scratch.
Properly handle the device after unpacking. Do not expose the device in humid
environment.
The following figure is for reference only, and the actual product shall prevail.
For the installation diagram and item list of model A and model B, see Figure 3-1and Table 3-1,
for those of model C, see Figure 3-2 and Table 3-2.
Figure 3-1
No.
Item
No.
Item
No.
Item
No.
Item
①
Mounting surface
②
Expansion bolt
③
Pedestal
④
Self-tapping screw
⑤
Locking screw
⑥
Dome
⑦
Wrench
Table 3-1
