BIOS SETUP
MI952 User’s Manual
31
PNP/PCI Configurations
This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Reset Configuration Data
Disabled ITEM
HELP
Resources Controlled By
Auto (ESCD)
IRQ Resources
Press Enter
IRQ Resources
PCI/VGA Palette Snoop
Disabled
Assign IRQ For VGA
Enabled
Assign IRQ For USB
Enabled
PCI Latency Timer(CLK)
64
Maximum Payload Size
4096
Reset Configuration Data
This field allows you to determine whether to reset the configuration
data or not. The default value is
Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
with the use of a PnP operating system such as Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA
can work with an MPEG ISA/VESA VGA card. When this field is
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.
Assign IRQ for VGA/USB
The default value is
Enabled
PCI Latency
PCI latency refers to the number of cycles that any device can hold an
IRQ before it is disconnected.
Maximum Payload Size
The default setting of the PCI Express Maximum Payload Size is 4096.
