IBT Technologies IB798, User Manual

Page: 7 / 56

INTRODUCTION
IB798 User’s Manual 3
Specifications
Form Factor 5.25” SBC
CPU Type
Via C7 or Eden-V4 NanoBGA2 (21x21mm) package
Eden-V4: 1.0~1.2GHz (heatsink only for fanless)
C7: 1.5~2.0GHz (heatsink w/ fan)
CPU Voltage 1.004V ~ 1.148V
CPU FSB 400/533MHz (target to support 800MHz once it is ready)
Cache
128KB L2 (CPU integrated)
Chipset
VIA CN700/8237R chipset
North bridge: CN700 567-pin HSBGA
South bridge: VT8237R 539-pin PBGA
Memory
One DDRII SO-DIMM socket, supports up to 1GB
VGA
CN700 built-in 128-bit Unichrome Pro 3D/2D controller
LAN
Realtek RTL8100C (10/100) LAN controller x 4
Bypass function on LAN1 & 2
USB VT8237R built-in USB 2.0, supports 6 ports, use 2 ports
Serial ATA
VT8237R built-in SATA controller, 2 ports w/ RAID 0, 1
( supports SATA II), use 1 port only
IDE Interface
Two channels; supports Ultra DMA 33/66/100/133
IDE1: 44pin header for HDD;
LPC I/O Winbond W83697HF: COM1, COM2 (RS-232), FDD,
Parallel port & hardware monitor (2 thermal inputs, 5
voltage monitor inputs, 1 chassis open detection & 2 fan
headers).
RTC/CMOS VT8237R built-in RTC with on board Lithium Battery
KB/Mouse
Supports PS/2 Keyboard/Mouse
Expansion Mini PCI socket x1; Compact Flash socket x1
Edge
Connectors DC-In power connector x1 for +5V DC in
RJ45 x4 for LAN 1~4; DB9 connector x 1 for COM1
Dual USB stack connector x 1 USB 1 & 2; Button x1 for GPI
Onboard
Connector /
Header
16 pins pin-header x 1 for VGA
Serial ATA connector x 1; 44 pins pin-header x 1 for IDE1
Compact Flash socket x1 (share IDE1)
10 pins pin-header x 1 for COM2
10 pins pin-header for PS/2 KB/Mouse
LED Indicator
4x green/yellow stack LED for LAN status
(Green for 10/100 LAN speed , 10 off, 100 on)
(Yellow for LAN Active/Link)
1x green LED for power status
2x green and 1x red led stack for GPO status
Power
+5V DC input
Watchdog Yes (256 segments: 0, 1, 2,..., 255 sec/min)
Digital I/O 5 programmed In/Out
Board Size 203mm x 146mm