IBT Technologies IB710 User Manual Download

Page: 22 / 76

INSTALLATIONS

IB710 User’s Manual

Power LED and Keylock: Pins 11 - 15

The power LED indicates the status of the main power
switch. The keylock switch, when closed, will disable the
keyboard function.

Pin #

Signal Name

Power LED

No connect

Ground

Keylock

Ground

Turbo LED Connector: Pins 8 and 18

There is the no turbo/deturbo function on the embedded
board. The Turbo LED on the control panel will always be on
when attached to this connector.

Pin #

Signal Name

Ground

Reset Switch: Pins 9 and 19

The reset switch allows the user to reset the system without
turning the main power switch off and then on. Orientation is
not required when making a connection to this header.

Hard Disk Drive LED Connector: Pins 10 and 20

This connector connects to the hard drive activity LED on
control panel. This LED will flash when the HDD is being
accessed.

Summary of Contents for IB710













































































Search results

Summary of Contents for IB710

Reviews:

Related manuals for IB710

Brands by name

Popular brands

IBT Technologies IB710, User Manual

Search results

Summary of Contents for IB710

Reviews:

Related manuals for IB710

Brands by name

Popular brands