IBT Technologies IB500, User Manual

Page: 69 / 78

SCSI DRIVERS INSTALLATION
IB500 User’s Manual 65
Driver Installation for Windows-NT
Files you need:
Script files for installation: txtsetup.oem, oemsetup.inf, disk1.
Device driver: INIA100.SYS
Installation:
A: Install Windows-NT on a hard drive from the INI-A100U2W
SCSI Host adapter.
1. If you are installing Windows-NT from a floppy drive, locate the
Windows-NT Disk 1 for floppy Installation. Make a backup copy of
this diskette.
2. If you are installing Windows-NT from a CD-ROM drive, locate the,
Windows-NT Setup Disk for CD-ROM Installation. Make a backup
copy of this diskette.
3. Put the disk into drive A and turn on your computer.
4. Follow the instructions, and select
CUSTOM SETUP .
5. Select OTHER from the list of Additional SCSI Adapters . A
message will appear on the screen stating
“
Requires disk provided by a
hardware manufacturer". Insert the diskette containing INI-A100U2W
device driver and press
ENTER .
6. Windows-NT will interpret the txtsetup.oem and oemsetup.inf script
files and load INIA100.SYS driver to xxx/system32/drivers directory.
B: Adding or updating the Initio driver to an existing Windows-NT
4.0 booted from IDE drive or different type of host adapter:
1. Establish a Windows-NT session.
- Select
CONTROL PANEL from within the MY COMPUTER
group.
- Select SCSI ADAPTERS from within the CONTROL PANEL
group.
2. Select the DRIVERS tab from within the SCSI ADAPTERS group:
- In the DRIVERS window, select ADD... .
3. In the INSTALL DRIVER window, select HAVE DISK... .
4. In the INSTALL FROM DISK window that is displayed, enter the
Initio Driver path name:
- Insert INI-A1000U2W Driver Disk 1 into drive A:
- Type
A:\WINNT , then select OK