39
5. SETUP / COMMISSIONING
5.1. Securing the device / Stability
The device must be installed in a stable, horizontal position on a solvent-resistant floor.
5.2. Acceptable ambient conditions
The ambient temperature must be between 5°C and 30°C.
5.3. On-Site Electrics
According to the regulation, the local installation may only be carried out by a qualified electrician.
The electrical supply line must be installed in accordance with the regulations and must comply with the information (Tech
-
nical data) given in the operating instructions.
5.4. Disposal
∙
The device is constructed primarily from steel (except the electrical components) and should be disposed of in accordance with the
applicable local environmental regulations.
∙
Contaminated parts (e.g. hoses, cleaning brushes, cleaning cloths, etc.) should be disposed of in accordance with the applicable
environmental regulations.
∙
Please contact IBS Scherer GmbH if you have any questions.
5.5. Precautionary measures to be taken by the operator
DANGER!
A danger area which is appropriate for the operating conditions (e.g. geometry and surface area of workpieces, intensity
of cleaning) must be defined. For normal cleaning processes, IBS recommends a danger area of 2 m around the device.
The danger area identified by means of a risk assessment:
∙
Must remain free of obstructions in order to allow unimpeded access at all times
∙
Must be equipped with effective natural ventilation
∙
Keep everything as clean as possible when working with cleaning agents, oils and lubricants
∙
Operating and maintenance personnel must receive proper training
∙
The operating instructions and the standard operating procedure must be attached to the device
IBS-BA_Typ_W-100_W-250-DE_CZ_PL_ES_EN_04.2020
EN
Summary of Contents for W-100
Page 43: ......
