background image

 

2.3. Non-approved cleaning agents 

 

 

 

 

Halogenated solvents 

 

Flammable and highly flammable solvents with flash point < 55°C, except for cleaning 
agents with flash point > 40°C when technical ventilation (exhaust system) is installed 

 

 

 
 

2.4. Standards 

 

Always comply with EN 12921-1 and EN 12921-3. 

 
 

3. Operating principle

 _________________________________________________________ 

 

 

3.1.

 

How the machine works 

The IBS pump pumps the cleaning liquid through a hose to the IBS cleaning brush. The 
workpiece is placed on the support rack and is cleaned with the brush and cleaning liquid. 

 

 

The dirty cleaning agent flows back into the drum. The dirt particles sink to the bottom of the 
drum. When the cleaning effect of the cleaning agent declines, the drum must be replaced 
with a new drum of IBS Special Cleaning Agent. 
 

 

3.2.

 

Safety information 

See section 6 

 
 

4. Transport

  _________________________________________________________________________ 

 

 

4.1.

 

Handling

 

  Take great care when transporting the device to the installation site at the customer's 

premises in order to prevent damage. 

  Secure the device on the pallet to ensure that it does not slip off. 

  When transporting the drum, read and follow the data sheet for the solvent. 

 

4.2.

 

Transport aids 
4.2.1. Transport using a crane 

  Attach the crane cables to the pallet and lift the device carefully. Pay special attention to the 

centre of gravity. The device may tip. 

 

NOTE

 

 

The crane must have a carrying capacity of at least 200 kg. 

 

4.2.2. Transport using a fork-lift 

  Insert the fork-lift between the longitudinal pieces on the wooden pallet.

 

  Lift the unit and transport it.

 

 
 
 
 

Summary of Contents for M










Reviews: