IBM xSeries 440 8687, Option Installation Manual

Page: 38 / 80

26
xSeries 440:Option Installation Guide
CD-ROM or DVD-ROM drive
Drive considerations:
• Your xSeries 440 server supports the installation of up to two CD-ROM drives, or
two DVD-ROM drives.
• If no other IDE drives are installed, the diskette drive must be installed in the right
external removable media bay. CD-ROM or DVD-ROM drives can be installed in
either external removable media bay.
Complete the following steps to remove and install a CD-ROM or DVD-ROM drive in
your server:
1. Review the information in “Before you begin” on page 9 and “Safety Information”
on page 11.
Attention: The IDE drives installed in your server are not hot-swappable.
2. Turn off the server and disconnect the power cords from the back of the server.
3. Push the CD-ROM or DVD-ROM eject button to the right.
4. Using the tab, pull the CD-ROM or DVD-ROM drive partially out of the server;
then, grasp the drive and remove it from the server.
5. Install the new CD-ROM or DVD-ROM drive:
a. Inspect the drive for any signs of damage.
b. Slide the CD-ROM or DVD-ROM drive into the drive bay until it stops.
6. If you have other options to install or remove, do so now. Otherwise, connect the
power cords and turn on the server.
NO
TE:
FOR PR
OPER AIRFLO
W, REPLA
CE F
AN
W
ITHIN 2 MINUTES
FR
ONT OF BO
X
NO
TE:
FOR PR
OPER AIRFLO
W, REPLA
CE F
AN
W
ITHIN 2 MINUTES
FR
ONT OF BO
X
External removable
media bays
CD-ROM
or DVD drive
CD-ROM drive
eject button
Tab