IBM XIV STORAGE SYSTEM, User Manual

Page: 12 / 652

v
host_luns_list (This command has been replaced by map_list_luns)
Adding a Host to a Cluster
Adds a host to a cluster.
cluster_add_host cluster=ClusterName host=HostName map=MapName
Parameters:
Name Type Description Mandatory
cluster Object name Name of the cluster to
contain the host. Y
host Object name Host to be added to the
cluster. Y
map Enumeration Override the mapping
of the host, cluster or
keep the host mapping
and add above it the
cluster mapping Y
This command adds a host to a cluster.
This command fails if the host already belongs to another cluster.
This operation succeeds if the host already belongs to the specified cluster and has
no effect.
Using the map parameter:
v
If the map parameter is cluster, the mapping of the host and host type is
changed to be the cluster's mapping and type.
v
If the map parameter is host, the mapping of the cluster and its host type is
changed to be the host's mapping and type.
v
If the map parameter is clusterWithHostExceptions the host is keeping his
mapping and apply on it the cluster mapping as well
v Use map=host to add a host to an empty cluster. This way to cluster will receive
the host’s mapping.
The host or cluster is getting a single SCSI unit attention message, even if the
change affects multiple volumes.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
6
IBM XIV Storage System User Manual