IBM XIV STORAGE SYSTEM, User Manual

Page: 183 / 652

Updating the Target Mirroring Configuration
Changes the target's mirroring configuration.
target_config_sync_rates target=TargetName
[ max_initialization_rate=MaxInitializationRate ]
[ max_syncjob_rate=MaxSyncjobRate ] [ max_resync_rate=MaxResyncRate ]
Parameters:
Name Type Description Mandatory Default
target Object name The updated
target. Y N/A
max_
initializa
tion_rate
Positive integer Specifies the
maximum rate for
initial
synchronization.
Cannot be larger
than
max_syncjob_rate. N Unchanged
max_
syncjob_
rate
Positive integer Specifies the
default maximum
rate for sync job
synchronization.
Cannot be larger
than
max_resync_rate. N Unchanged
max_
resync_
rate
Positive integer Specifies the
maximum rate for
re-synchronization N Unchanged
This command changes the system ID of the remote target. The synchronization
rate units are Megabytes per second. The default rates are: 100 MB/s for
initialization rate, 300 MB/s for resync rate. The default system_id is the value that
is set with the config_set command.
Access Control:
User Category Permission
Storage administrator Allowed
Storage integration administrator Allowed
Application administrator Disallowed
Security administrator Disallowed
Read-only users Disallowed
Technicians Disallowed
Completion Codes:
v
TARGET_BAD_NAME
Target name does not exist
v
TARGET_ILLEGAL_RATE_VALUES
max init rate should be smaller or equal to max sync job rate. max sync job rate
should not be greater than max resync rate.
Chapter 10. Remote Target Connectivity
177