IBM x3750 M4, Installation And Service Manual, Page: 40 / 694

Instructions for IBM Business Partners
In addition to the instructions in this chapter for installing optional hardware
devices, updating firmware and device drivers, and completing the installation,
IBM Business Partners must also complete the following steps:
1. After you have confirmed that the server starts correctly and recognizes the
newly installed devices and that no error LEDs are lit, run the Dynamic System
Analysis (DSA) stress test. For information about using DSA, see “IBM
Dynamic System Analysis” on page 169.
2.
Shut down and restart the server multiple times to ensure that the server is
correctly configured and functions correctly with the newly installed devices.
3. Save the DSA log as a file and send it to IBM. For information about
transferring data and logs, see “How to send DSA data to IBM.”
4. To ship the server, repackage it in the original undamaged packing material
and observe IBM procedures for shipping.
Support information for IBM Business Partners is available at http://
www.ibm.com/partnerworld/pwhome.nsf/weblook/index_us.html.
How to send DSA data to IBM
Before you send diagnostic data to IBM, read the terms of use at
http://www.ibm.com/de/support/ecurep/terms.html.
You can use any of the following methods to send diagnostic data to IBM:
v
Standard upload: http://www.ibm.com/de/support/ecurep/send_http.html
v
Standard upload with the system serial number: http://www.ecurep.ibm.com/
app/upload_hw
v
Secure upload: http://www.ibm.com/de/support/ecurep/
send_http.html#secure
v
Secure upload with the system serial number: https://www.ecurep.ibm.com/
app/upload_hw
24
System x3750 M4 Types 8722 and 8733: Installation and Service Guide