IBM x3750 M4 Installation And Service Manual Download Page 260 | Manualshive

Page: 260 / 694

IBM x3750 M4 Installation And Service Manual Download Page 260

Replacing a hot-swap fan assembly

The server comes standard with six speed-controlled hot-swap cooling fans.

Attention:

To ensure proper operation, replace a failed hot-swap fan within 30

seconds.

To install or replace a hot-swap fan, complete the following steps:

1.

Touch the static-protective package that contains the new fan to any unpainted
metal surface on the server. Then, remove the new fan from the package.

2.

Orient the fan over the fan slot in the fan cage assembly so that the fan
connector aligns with the connector on the system board.

Hot-swap
fan error LED

Hot-swap fan

Fan latch

3.

Insert the fan into the fan slot in the fan cage assembly and ensure that is it
seated correctly and the fan release tab is in the slot (hole) on the fan cage
assembly.

4.

Install the cover (see “Replacing the server top cover” on page 207).

5.

Slide the server into the rack.

244

System x3750 M4 Types 8722 and 8733: Installation and Service Guide

«
...
258
259
260
261
262
...
»

Summary of Contents for x3750 M4























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments