Tip:
Tap abc , 123 , or Int’l to
switch keyboards.
o
ll
.
After your WorkPad c3 PC companion completes its initial 3-hour charge, turn it on,
remove the plastic sheet from the screen, and follow the setup instructions on the screen.
Hint:
If your companion does not turn on, see Troubleshooting and Contacts on the
back of this guide.
Using your computer keyboard
Type information in your Palm™ Desktop for IBM WorkPad, and then place your
companion in the cradle and press the HotSync
®
button to exchange data between
your companion and computer.
Three ways to enter data into your WorkPadc3 PC companion
Using the onscreen keyboard
Tap the text or a blank line on the companion screen. (The cursor should blink
to indicate you’re in edit mode.) Tap the dot under “abc” for the letter keyboard or the
dot under “123” for the number keyboard. Tap the characters and then tap Done.
1.
2.
