IBM WebSphere DataPower XC10, Installation Manual

Page: 36 / 52

2.
If the appliance is locked into place, slide the appliance toward you so that you
can attach the brackets with the captive screws.
3. Attach the brackets with the captive screws, as shown in Figure 7. Attach the
right bracket to the chassis:
a. Align the holes in the right bracket with the holes in the front right side of
the chassis.
b. Use a screwdriver to tighten the provided screws into the chassis.
Repeat this process to attach the left bracket to the chassis.
4.
Slide the appliance into the rack until it locks into place.
5. Hand-tighten the captive screws on the brackets to the rack frame.
Figure 6. Sliding the appliance into the rack
Captive screw
Figure 7. The bracket attaching to the chassis
16
IBM WebSphere DataPower XC10: Installation Guide