IBM TS3400 Maintenance Information Download

Page: 124 / 295

6-18

TS3400 Tape Library Maintenance Information

Adding a Drive Canister Shipped with Library

To install a 3592 drive canister that was shipped with this library, complete the
following steps:

Remove all drive cover plates ( in Figure 6-20) from the rear panel of the
library. Store the cover plate and retaining screw for future use.

Figure 6-20. Drive cover plate

Carefully slide the drive canister into the fixed tray assembly.

Hold the locking lever ( in Figure 6-21) up to ensure the tabs on both sides of
the lever clear the frame.

Figure 6-21. Front and rear view of tape drive

a34z0017

E05

SHORT-WAV

b /

PORT

0 P

ORT

Enc

a69m0227

Summary of Contents for TS3400








































































































































































































































































































Search results

Summary of Contents for TS3400

Reviews:

Related manuals for TS3400

Brands by name

Popular brands

IBM TS3400, Maintenance Information

Search results

Summary of Contents for TS3400

Reviews:

Related manuals for TS3400

Brands by name

Popular brands