IBM TotalStorage DS4300 Turbo, Installation And User Manual

Page: 106 / 164

a. Release the blue latch
1
on the drive CRU by pressing on the inside of
the bottom of the tray handle. See Figure 59.
b. Pull the handle
2
on the tray out into the open position.
c. Slide the drive CRU into the empty bay until the tray handle
2
touches the
storage-server bezel.
d. Push the tray handle
2
down into the closed (latched) position.
5. Check the drive LEDs.
a. When a drive is ready for use, the green Activity LED is either continuously
on or rapidly flashing, and the amber Drive fault LED is off.
b. If the amber Drive fault LED is completely on and not flashing, remove the
drive from the unit and wait 10 seconds; then reinstall the drive.
6. Use the Storage Manager client to configure the drive.
7. Update the information in Appendix A, “Records,” on page 105.
Figure 59. Releasing the drive latch
76
IBM TotalStorage DS4300 Fibre Channel Storage Server: Installation and User’s Guide