IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 183 / 605

Accessor mounts per hour...
Displays mounts per hour for each accessor (see Figure 96 on page 167).
VE-x Allows selection of the following for each TS7700 Virtualization Engine,
where x denotes the TS7700 Virtualization Engine (VE) number:
VE x Status...
Displays the status of each VTS configured in the 3494 Tape
Library (see “VE / VTS Status” on page 167).
VE x Active data...
Displays VTS active data statistics (see “VTS Active Data” on page
172).
VTS x Data flow...
Displays VTS data flow statistics (see “VTS Data Flow” on page
174).
VTS x Mount hit data...
Displays VTS mount hit data (see “VTS Mount Hit Data” on page
175).
VTS x Physical device mount history...
Displays VTS physical device mount history (see “VTS Physical
Device Mount History” on page 177).
VTS x Logical mounts per hour...
Displays VTS logical mounts per hour statistics (see “VTS Logical
Mounts Per Hour” on page 178).
VTS x Active data distribution...
Displays VTS active data distribution statistics (see “VTS Active
Data Distribution” on page 179).
System summary...
Displays subsystem status (see “System Summary” on page 180).
LAN Status...
Displays LAN status (see “LAN Host Status” on page 185).
Dual path concentrator status...
Displays VTSs and tape controllers that are capable of Dual Path
Concentrator. Also enables the Dual Path Concentrator function on the
Library Manager. (see “Dual Path Concentrator” on page 187).
Dual accessor zones...
Displays frames that each accessor services (see Figure 109 on page 188).
EASH Status...
Displays status information about each Ethernet-Attached Serial Hub
(EASH) installed in the 3494 Tape Library (see “EASH Status” on page
188).
Operational Status
Figure 87 on page 158 shows the top portion of the Operational Status window.
Note: You can view operational status from the Specialist (see “Specialist Features
and Functions” on page 396).
Chapter 6. Advanced Operating Procedures
157