IBM TotalStorage 3494 Tape Library, Operator'S Manual

Page: 205 / 605

Help Provides help about the VTS Logical Mounts Per Hour window.
To close the VTS Logical Mounts Per Hour window, select the Close option in the
System Menu icon (upper-left corner of the window).
VTS Active Data Distribution
Notes:
v
This window is not used with the TS7700 Virtualization Engine.
v You can view VTS active data from the Specialist (see “Specialist
Features and Functions” on page 396).
The VTS Active Data Distribution windows display graphs showing the
distribution of active data on stacked volumes. Separate graphs are available for
each VTS in the 3494 Tape Library. If the VTS has FC 4001-4004, Advanced Policy
Management, data can be displayed for all pools (Figure 104) or for a specific pool
(Figure 105 on page 180). If the VTS is not Advanced Policy Management capable,
data is displayed for all pools. Data is displayed in 5% increments. The first data
point shows the number of volumes that contain 0%–5% active data, the second
data point shows the number of volumes containing 6%–10%, and so on.
Figure 104. VTS Active Data Distribution (All Pools)
Chapter 6. Advanced Operating Procedures
179