IBM totalstorage 200, Hardware Installation Manual

Page: 81 / 152

Replacing the door and bezel
Model 200:
To replace the bezel:
1. Place the tabs at the bottom edge of the bezel in the slots at the bottom front of
the appliance.
2. Press the top of the bezel toward the appliance until it clicks into place.
To install the appliance door:
1. Set the door on the bottom hinge.
2. Press the flange downward while pressing the top of the door toward the
appliance, until the flange connects with the top hinge. Then, release the flange.
3. Close and lock the appliance door.
Attention: Be sure to maintain a clearance of at least 127 mm (5 in.) on the
front and rear of the appliance to allow for air circulation.
Bezel
Flange
Door
Figure 47. Replacing the Model 200 bezel
Chapter 3. Adding and replacing components
67