IBM THINKPAD R50 series, Service And Troubleshooting Manual

Page: 63 / 108

Enabling Extended Channel Mode
The statement below regarding the extended channel mode is applicable when
the system supports this function. To check the support of this function,
please see the property of the installed wireless card by referring to the
extended channel mode enablement instruction.
In countries other than the United States and Canada, extra IEEE 802.11b
channels may be supported. If you have a problem to connect an Access
Point, please contact your system administrator or check your Access Point to
know which channel is used. And if the 802.11b channel is 12 or greater, you
will need to enable “Extended Channel Mode” with next steps.
1.
Start Windows 2000/XP. Logon with administrative privileges.
2. Right mouse click on My computer on Desktop and select Property.
3. Click on Hardware Tab and push Device Manager Button.
4. Double-click on Network Adapter, locate a wireless adapter device, right
mouse click on the device and select Property.
5. Click on Advanced Tab.
6. Select “Extended Channel Mode” and set the value to “Enable”.
Note:
This will be applied for systems with 802.11b wireless function
supporting Extended Channel Mode.
Appendix B. Wireless related information
53