4. Follow the instruction on the screen to read original
system serial number.
After you have replaced the system board, restore the
serial number by doing the following:
1. Install the Maintenance Diskette and restart the
computer.
2. When the IBM logo is displayed, press the
″
ESC
″
key
few times until BIOS copyright and diagnostics screen
appears.
3. Select
2.VPD Utility from the main menu.
4. Follow the instruction on the screen to update the
system serial number.
Note:
The serial number of the system unit is written on
the label attached on the bottom of the computer.
UUID
The Universal Unique Identifier (UUID) is a 128–bit number
uniquely assigned to your computer at production and
stored in the EEPROM of your 24RF08. The algorithm that
generates the unique number is designed to provide
unique IDs until the year A.D. 3400. Consequently, no tow
computers in the world will have the same number.
When you replace the system board, you must set the
UUID on the new system board as follows:
1. Install the ThinkPad Maintenance Diskette and restart
the computer.
2. When the IBM logo is displayed, press the
″
ESC
″
key
few times until BIOS copyright and diagnostics screen
appears.
3. Select
3. UUID Data Utility
from the main menu then
make a selection to read or create the UUID data.
A new UUID is created and written. If a valid UUID already
exists, it is not overwritten.
MT 2658/2659/2677
25
Summary of Contents for ThinkPad R32 2658
