IBM ThinkPad 22P7028, User Manual

Page: 21 / 54

To use UDF formatted DVD-RAM, DVD-RW, or CD-RW media in other
computers, a UDF reader is included on the User’s Guide and Software CD. To
use the UDF reader, follow this procedure:
1. Insert the User’s Guide and Software CD into the CD or DVD drive of the
computer you want to use the UDF formatted discs with.
2. Click Start .
3. Click Run .
4. Type e:\UDF\language where e is the drive letter of the CD or DVD drive,
and language is your language.
5.
Click
OK
.
6.
Double-click SETUP.EXE and follow the on-screen instructions.
Note: The UDF reader is only needed on systems that do not have another
DLA program for CD-RW or DVD-RW installed.
Enabling the DMA setting
This section explains enabling the DMA setting with Windows 2000 and
Windows XP.:
For Windows 2000
1.
Click
Start
, move the cursor to
Settings
, and click
Control Panel
.
2.
Double-click
System
.
3.
Click the
Hardware
tab.
4.
Click the
Device Manager
button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE . (Double-click Primary IDE if you are using
the ThinkPad A21e computer.)
7. Select the DMA is available as the Transfer Mode.
8. Click OK .
9. Click Close to close System Properties window. A message displays,
informing you that the system settings have changed.
10. Click OK to restart the system.
For Windows XP
1. Click Start , move the cursor to My Computer , and click on it.
2. Click on View system information under System Tasks.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Click IDE ATA/ATAPI controller to pull down the submenu.
6. Double-click Secondary IDE . (Double-click Primary IDE if you are using
the ThinkPad A21e computer.)
Chapter 2. Using the Multi-Burner drive
13