IBM System x3400 M3 Types 7378, Installation And User Manual

Page: 81 / 154

p. If you have another drive to install or remove, do so now.
q. Replace the left-side cover and bezel; then, lock the left-side cover and
bezel.
r. Reconnect the external cables and power cords.
2. To install the UltraSlim DVD drive on models with eight 3.5-inch, complete
the following steps:
v Locate the documentation that comes with the drive and follow those
instructions in addition to the instructions in this chapter.
v
Make sure that you have all the cables and other equipment that are
specified in the documentation that comes with the drive.
v The server supports one ultra-slim SATA optical drive.
a. If you are replacing a drive, make sure that:
v You have all the cables and other equipment that are specified in the
documentation that comes with the new drive.
v
You have checked the instructions that come with the new drive to
determine whether you must set any switches or jumpers in the drive.
v
You have removed the blue optical drive rails from the side of the old
drive and have them available for installation on the new drive.
Note: If you are installing a drive that contains a laser, observe the
following safety precaution.
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic
devices, or transmitters) are installed, note the following:
v
Do not remove the covers. Removing the covers of the laser product
could result in exposure to hazardous laser radiation. There are no
serviceable parts inside the device.
v Use of controls or adjustments or performance of procedures other
than those specified herein might result in hazardous radiation
exposure.
Chapter 2. Installing optional devices
65