IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 183 / 232

Appendix B. IP address worksheet
Use this worksheet to specify the IP addresses assigned to the TS7650G or TS7650
Appliance components. IBM service representatives use the information provided
to define the IP addresses of components supported by the TSSC. When the TSSC
sends Call Home information to IBM through VPN or modem, or sends you
notices about serviceable events, these settings will be included in the information
to identify and provide important information about the TSSC that sent a service
request.
Table 52 on page 146 and Table 54 on page 147 show the default IP addresses for
the TS7650G and TS7650 Appliance servers with VTL configurations.
Table 53 on page 146 and Table 55 on page 148 show the default IP addresses for
the TS7650G and TS7650 Appliance servers with OpenStorage configurations.
Table 57 on page 149 shows the IP address, network mask, DNS and VLAN
settings for the source and destination servers for replication. This information is
needed to configure the individual ports to communicate and transfer data over
the replication network. Write this information in the spaces provided for future
reference. Table 58 on page 150 shows the host names and other settings needed
for replication. Write the appropriate information in the spaces provided for future
reference.
Table 59 on page 151 shows the default IP addresses for the TSSC.
Table 60 on page 152 shows the IP address ranges for the gateway or appliance
components once they are configured to be on the TSSC's 172.31.1.xx network. In
the spaces provided in Table 60 on page 152, write the IP addresses that you assign
for each component, so that the IP address information is available for future
reference.
© Copyright IBM Corp. 2008, 2010
145
|
|