IBM System Storage TS7650G 3958 DD4, Installation Roadmap Manual

Page: 187 / 232

Customer IP addresses
Table 56. Customer IP addresses
Node A (the
server located in
the lower part of
the rack)
Port Host Name IP Address Network Mask Default Gateway
eth0
Node B (the
server located in
the upper part of
the rack)
Port IP Address Network Mask Default Gateway
eth0
Customer and Replication IP addresses
Table 57. Customer and Replication IP addresses for VTL or OpenStorage systems
Default gateways for eth2 and eth5 for VTL systems or eth5 or eth13 for OpenStorage systems should be different,
otherwise the vlans are meaningless.
For VTL systems, provide a routing path from the IP address on eth2-server1 to the IP address of eth2-server2, and
a routing path from the IP address on eth5-server1 to the IP address of eth5-server2. For OpenStorage systems,
provide a routing path from the IP address on eth5-server1 to the IP address of eth5-server2, and a routing path
from the IP address on eth13-server1 to the IP address of eth13-server2.
Source Site
Node A (the
server located in
the lower part of
the rack)
Port IP Address Network Mask Default Gateway Dedicated VLAN
eth2 for VTL
systems or eth5
for OpenStorage
systems
eth5 for VTL
systems or eth13
for OpenStorage
systems
Node B (the
server located in
the upper part of
the rack)
Port IP Address Network Mask Default Gateway Dedicated VLAN
eth2 for VTL
systems or eth5
for OpenStorage
systems
eth5 for VTL
systems or eth13
for OpenStorage
systems
Destination or Target Site
Node A (the
server located in
the lower part of
the rack)
Port IP Address Network Mask Default Gateway Dedicated VLAN
eth2 for VTL
systems or eth5
for OpenStorage
systems
eth5 for VTL
systems or eth13
for OpenStorage
systems
Appendix B. IP address worksheet
149
|
|
||
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
| ||||
|
|
|
| ||||
|
|
|
|
| |||||
|
|
|
|
||||
|
|
|
|
||||
|
|
|
|
|
| |||||
|
|
|
|
||||
|
|
|
|
||||