New base frame models L23 and L53 come with support for the embedded SMI-S
Agent. Other frame models, however, require upgrades in order to support the
embedded SMI-S Agent. The following table displays the frame models and
required upgrades.
Table 20. Required upgrade for those frames providing Ethernet attachment to the SMI-S
Agent
Frame model
Required upgrade
L22, D22
Installation of feature code 1700 or 1701
or
model conversion to L23 or D23
L23, D23
No upgrade required
L32, D32
Installation of feature code 1700 or 1701
L52, D52
Installation of feature code 1700 or 1701
or
model conversion to L53 or D53
L53, D53
No upgrade required
The TS3500 Tape Library SMI-S HTTP service operates on the library Ethernet
interface IP address on port 5988 by default. The SMI-S service agent can be
enabled and disabled using the library Web interface (see the appropriate section
in the
IBM System Storage TS3500 Tape Library with ALMS Operator Guide
). The
TS3500 Tape Library embedded SMI-S service uses "root/ibm" as the Namespace.
Namespace is a configuration parameter needed to access the SMI-S service for an
SMI-S client such as TPC.
The user authentication and security (SSL) for the SMI-S service works in
conjunction with the Web service. When the Web user accounts are enabled, the
same user accounts and passwords are used for SMI-S service authentication.
When Web SSL is enabled, the SMI-S HTTPS service is enabled on port 5989 and
the SMI-S HTTP service is disabled on port 5988.
An SMI-S profile is a subset of the SMI-S standard that supports interoperability in
managing specific products such as tape libraries. A profile is a vertical slice
through the SMI-S standard defining physical, logical, and behavioral elements
required for interoperability.
The TS3500 Tape Library embedded SMI-S service supports the following profiles:
Table 21. Embedded SIM-S Agent Profiles
Profile
Sub Profiles
SMI-S Version
Server Profile
n/a
1.2
Storage Media Library
1.2
Limited Access Port
1.2
Chassis
1.2
FC Port
1.2
Software
1.2
Physical Package
1.2
Note:
Two versions of the embedded SMI-S agent are supported by the TS3500
Tape Library. The initial version (v1.1), released with code level 7050, does not
Chapter 1. Introduction
73
Summary of Contents for System Storage TS3500
