IBM Storwize V7000 Quick Installation Manual Download Page 96 | Manualshive

Page: 96 / 102

background image

unauthorized changes or modifications to this equipment. Unauthorized changes
or modifications could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device might not cause harmful interference, and
(2) this device must accept any interference received, including interference that
might cause undesired operation.

Industry Canada compliance statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conform à la norme NMB-003 du
Canada.

Australia and New Zealand Class A Statement

Attention:

This is a Class A product. In a domestic environment this product

might cause radio interference in which case the user might be required to take
adequate measures.

European Union Electromagnetic Compatibility Directive

This product is in conformity with the protection requirements of European Union
(EU) Council Directive 2004/108/EC on the approximation of the laws of the
Member States relating to electromagnetic compatibility. IBM cannot accept
responsibility for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product, including the fitting of non-IBM
option cards.

Attention:

This is an EN 55022 Class A product. In a domestic environment this

product might cause radio interference in which case the user might be required to
take adequate measures.

Responsible Manufacturer:

International Business Machines Corp.
New Orchard Road
Armonk, New York 10504
914-499-1900

European community contact:

IBM Deutschland GmbH
Technical Regulations, Department M372
IBM-Allee 1, 71139 Ehningen, Germany
Tele: +49 7032 15-2941
Email: [email protected]

Germany Electromagnetic Compatibility Directive

Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse A EU-Richtlinie
zur Elektromagnetischen Verträglichkeit

76

IBM Storwize V7000 Unified: Model 2073-720 Quick Installation Guide

«
...
94
95
96
97
98
...
»

Summary of Contents for Storwize V7000







































































































Reviews:

No comments

Related manuals for Storwize V7000

TotalStorage DS300

Brand: IBM Pages: 110

System storage DS6000 Series

Brand: IBM Pages: 298

System storage DS6000 Series

Brand: IBM Pages: 58

Brand: IBM Pages: 78

Brand: Backyard Products Pages: 72

Brand: Apricorn Pages: 4

Brand: US Robotics Pages: 156

Brand: ramia Pages: 3

Brand: Et Pages: 22

Brand: G&T SALES Pages: 2

Forensic ComboDock FCDv6

Brand: WiebeTech Pages: 20

Brand: Duratuf Pages: 17

Brand: Swissbit Pages: 11

Brand: M-Systems Pages: 22

Brand: Bull Pages: 50

Brand: Conrad Pages: 4

Brand: Magnusson Pages: 18

BARRACUDA ST1000DM014

Brand: Seagate Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands