IBM Slicestor 2584, Installation Manual, Page: 32 / 42

Ops panel LEDs
Ops panel LEDs show logical status and faults by drawer.
The following figure shows the LEDs on the Ops panel.
Table 3. Ops module LED states
Unit ID
display
Power
(green/
amber) Module
fault
(amber) Logical
status
(amber)
Drawer 1
fault Drawer 2
fault Associated
LEDs or alarms
Status
X On Off Off Off Off Aux present, overall
power failed or off
X On On X X X Single beep,
then double Ops panel power on
(5s) test state
X On Off Off Off Off Power on, all
functions good
X On On X Off Off PSU fault LEDs,
fan fault LEDs Any PSU fault, fan
fault, over or under
temperature
X On On X Off Off SBB module
LEDs Any SBB module
fault
X On Flashing X Off Off Enclosure logical
fault such as VPD
configuration error
X On Flashing X Off Off Module status
LED on SBB
module Unknown SBB
module type
installed, I2C Bus
failure, or VPD
configuration error
X On Flashing X Off Off PSU fault LEDs,
fan fault LEDs Unknown (invalid or
mixed) PSU module
type installed, or I2C
Bus failure (PSU
comms)
Figure 16. Ops panel LEDs
18
Slicestor
®
2584 Installation Guide