IBM Slicestor 2584, Installation Manual, Page: 27 / 42

Install a PSU
Installation is the reverse of the removal process. Ensure that the retaining latch clicks into place.
Remove an SBB compute module
Note: A variety of compute modules can be used in the enclosure. The following steps show a 6Gb/s
SAS EBOD compute module but the procedure is the same for a SBB compute module.
1. Grasp the module latch between the thumb and forefinger and squeeze them together to release the
latch, as shown in the following figure.
2. Pull the latch outward to cam the module out of the enclosure.
3. Grip the latch handles and withdraw the module, as shown in the following figure.
Figure 11. Removing a PSU (2)
Figure 12. Removing a module (1). (6Gb/s SAS EBOD module shown)
Chapter 3. Installing the appliance into a rack
13