IBM SAS RAID controllers Page 77 Manual Download | Manualshive

Page: 77 / 82

background image

any radio or television interference caused by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Industry Canada Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003.

Avis de conformité à la réglementation d'Industrie Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

European Community Compliance Statement

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on
the approximation of the laws of the Member States relating to electromagnetic compatibility. IBM cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product, including the fitting of non-IBM option cards.

This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for
typical residential environments to provide reasonable protection against interference with licensed
communication equipment.

European Community contact:
IBM Deutschland GmbH
Technical Regulations, Department M372
IBM-Allee 1, 71139 Ehningen, Germany
Tele: +49 7032 15 2941
email: [email protected]

VCCI Statement - Japan

Japanese Electronics and Information Technology Industries Association (JEITA)
Confirmed Harmonics Guideline (products less than or equal to 20 A per phase)

Notices

65

«
...
75
76
77
78
79
...
»

Summary of Contents for SAS RAID controllers



















































































Reviews:

No comments

Related manuals for SAS RAID controllers

Brand: ODA Pages: 113

Brand: Davey Water Products Pages: 4

Brand: Kärcher Pages: 148

Brand: Keithley Pages: 10

Brand: Veit Pages: 70

Brand: Wacker Neuson Pages: 22

Brand: Artos Pages: 185

Brand: HELVAR Pages: 2

Brand: Kett Pages: 6

Silent Pro Gold RS-600-80GA-D3

Brand: Cooler Master Pages: 10

Brand: Akyga Pages: 4

Brand: daisalux Pages: 6

FlatpackS 48/1000 HE

Brand: Eltek Pages: 19

Brand: TDK-Lambda Pages: 18

Brand: Kerbl Pages: 15

Brand: Parkside Pages: 44

eFlow102N Series

Brand: EFLOW Pages: 16

Brand: Hotline Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands