IBM SAS RAID controllers Manual Download Page 25

Page: 25 / 82

PCIe3 SAS RAID card comparison

This table compares the main features of PCI Express 3.0 (PCIe3) SAS RAID cards.

Table 5. PCIe3 SAS RAID controller cards

CCIN (custom card identification number)

57B4

57CE

Description

PCIe3 RAID SAS adapter Quad-port 6 Gb x8

PCIe3 12 GB Cache RAID SAS adapter
Quad-port 6 Gb x8

Form factor

PCIe3 x8

Physical links

16 (four mini SAS HD 4x connectors)

Supported RAID levels

RAID 5, RAID 6, RAID 10

, and System

mirroring

RAID 5, RAID 6, RAID 10

, and System

mirroring

Write cache size

Up to 12 GB (compressed)

Read cache size

Cache battery pack technology

None (uses supercapacitor technology)

Cache battery concurrent maintenance

Cache data present LED

Removable cache card

Auxiliary write cache (AWC) support

Dual-storage IOA configuration

Yes

Requires dual-storage IOA configuration

Yes

SAS tape support

Yes

SAS DVD support

Yes

1,3

520-byte virtual disk support

Yes

Notes:

SAS tape and SATA DVD are only supported in a single adapter configuration and cannot be mixed with SAS disk on the same adapter. For

more information, see Planning for serial-attached SCSI cables.

RAID 10 requires IBM

i Version 7.2, or later.

SATA DVD is supported on all CCIN 57B4 adapters, except for those with initial part numbers of either 00FX843, 00MH900, 00FX846, or

00MH903.

Figure 16. CCIN 57B4 PCIe3 RAID SAS adapter Quad-port 6 Gb x8, two units

SAS RAID controllers for IBM i

Summary of Contents for SAS RAID controllers



















































































Search results

Summary of Contents for SAS RAID controllers

Reviews:

Brands by name

Popular brands

IBM SAS RAID controllers, Manual

Search results

Summary of Contents for SAS RAID controllers

Reviews:

Brands by name

Popular brands