IBM SAS RAID controllers Manual Download

Page: 18 / 82

Table 2. PCIe SAS RAID controller card comparison (continued)

Features

2B4C

574E

57B3

57B7

Auxiliary write cache (AWC)
support

Yes

Dual storage IOA
configuration

Yes

Requires dual storage IOA
configuration

Yes

The write performance of RAID 5 and RAID 6 might be poor on adapters that do not provide write cache. Consider using an adapter that

provides write cache when using RAID 5 or RAID 6, or use solid-state drives (SSDs) where they are supported to improve write performance.

Table 3. PCIe SAS RAID controller card comparison

Features

57C7

57CB

57CD

57CF

Description

PCI Express x8 Planar 3 Gb
SAS adapter (disk/media
backplane)

PCIe x4 Planar 3 Gb SAS
RAID adapter

PCIe SAS RAID and SSD
adapter 3 Gb x8

PCI Express x8 planar 3 Gb
SAS RAID adapter (with 175
MB Cache RAID - Dual IOA
Enablement card)

Form factor

Planar

Planar cache enablement

Double-wide PCIe x8 with
1 to 4 integrated SSDs

Planar and Enablement card

Physical links

8 (two 2x wide ports to
shared SAS drives and one
2x wide port to 2B4F, one
physical link to DVD, and
optionally one physical link
to tape drive)

4 (one direct SAS physical
link to each integrated
SSD)

RAID levels supported

RAID 5

, RAID 6

, system

mirroring

RAID 5, RAID 6, system
mirroring

Write cache size

175 MB

Read cache size

Cache battery pack technology

Lithium ion

Cache battery concurrent
maintenance

Yes

Cache data present LED

Yes

Removable cache card

Auxiliary write cache (AWC)
support

Dual storage IOA
configuration

Yes

Requires dual storage IOA
configuration

Yes

520-byte virtual disk support

The write performance of RAID 5 and RAID 6 might be poor on adapters that do not provide write cache. Consider using an adapter that

provides write cache when using RAID 5 or RAID 6, or use solid-state drives (SSDs) where they are supported to improve write performance.

Adapter graphics

View the SAS RAID controllers.

SAS RAID controllers for IBM i

Summary of Contents for SAS RAID controllers



















































































Search results

Summary of Contents for SAS RAID controllers

Reviews:

Related manuals for SAS RAID controllers

Brands by name

Popular brands

IBM SAS RAID controllers, Manual

Search results

Summary of Contents for SAS RAID controllers

Reviews:

Related manuals for SAS RAID controllers

Brands by name

Popular brands